Tineo home

Settings

How do you choose the order of cities on a multi-country trip?

Tineo Editorial Team Last updated 6 min read

Choose city order as a direction: one way across the map, with as little retracing as the dates allow, and with every overnight train or flight counted as a travel day before you give the cities their anchors. Decide whether you will close the loop back to the first city or fly home from the last one. The long-haul landing gets a light first day. The worked route uses invented cities, and it is neither a timetable nor a fare.

Pick a direction before the favorites

List the cities, then list what is already fixed. A ceremony or a match pins one city to specific nights. A flight you have bought pins the airports. Everything else should move into a line that does not cross itself. Each hop has to be progress. A favorite that sits off the line joins the route only if you can enter and leave it without returning to a city you have finished.

Check that each hop is something you can buy. A tidy line can hide a pair of cities with no flight and no train on your dates. Confirm the airports in IATA’s code search, then check the airline or rail operator. How a multi-city fare is built is why this comes before you commit to the map. Verified codes, and a note of one ticket or separate tickets, belong on the worksheet at /guides/multi-city-trip-map-planner/.

Backtracking spends a day and adds a leg

Backtracking means you return to a place you already left, or you cross the same corridor twice, because a city was inserted in the wrong slot. The extra crossing is a flight, a train, or a long bus. It consumes a date, and it changes the fare, because you added a sector and you may have changed the city the fare engine treats as the turnaround. Travelport notes that your idea of the destination and the fare’s point of turnaround are not always the same city.

Separate tickets make that extra leg brittle. Each ticket is its own contract. Where EU air passenger rights apply, Your Europe ties missed-connection compensation to a single reservation, to those rights applying, and to the cause of the delay. A positioning flight you bought alone does not borrow that treatment. If you must collect bags and check in again, read what a self-transfer is. IATA’s minimum connecting time is the shortest official transfer interval at that airport for a connection the systems will build. It is not your buffer, and it does not span two tickets. Size the gap with how much layover time you need.

An overnight move is a travel day

An overnight train, a night ferry, or a redeye uses the night and the next morning. Count that whole block as travel. The city you left does not get an evening anchor if you had to be at the station at dusk, and the city you enter does not get a full day if you arrive at dawn.

Your Europe’s rail page limits the missed-connection rights it describes to a through-ticket. Individual tickets do not carry those rights, though operators sometimes have their own continuation arrangements. An overnight train you bought alone can be late without the next morning’s reservation knowing. Keep the first anchor off that morning. How many days to give the city is the longer version of this partial day. Sleeping on the train can save a hotel night. Write “travel” on that date anyway, and give the anchors to other dates.

The morning you land is a poor time for a deadline

The first city absorbs the long flight. That calendar date includes the flight itself. A reservation that starts soon after scheduled arrival fails when the inbound is late, when immigration is slow, or when the airport code you booked is an hour from town. Confirm the code. Then put nothing immovable on that date.

A long eastbound or westbound flight also makes the next morning a poor slot for the anchor you care about most. You can be in the city and still be on the clock you left. This is a scheduling observation, not a medical rule, and it is not a days-per-time-zone formula. Move the anchor you cannot miss to the following day. Use the arrival date for a walk, a meal, and sleep. If you want the densest city while you are sharp, give it the first full day, and write that choice down so the day count matches it.

Close the loop, or leave it open

A closed loop returns the abroad portion to the airport where it started. You fly into Alden, travel onward, come back to Alden, and fly home from Alden. Travelport describes a circle trip as a return that stops in more than one place before it reaches the origin again. The flight home leaves from a city you already know. The leg back to Alden can be a whole extra day.

An open jaw leaves that loop open. You fly into Alden and home from the last city, and the ground between them is yours. What an open-jaw ticket is compares that one ticket with a round trip plus a one-way and with two one-ways. Choose the shape before you search. A round trip into Alden, followed later by a one-way home from somewhere else, is how an unused return coupon appears.

A hub night back at the first airport is the loop’s failure mode. You did the cities in a line, then you bolt on a night so the original round trip still works. That night is a bed. If you have not bought the ticket yet, price the open jaw and let the order lead.

An illustrative route, walked once

Alden, Bruck, and Corvia are invented, and they sit in that order on an invented map: Alden at one end, Bruck in the middle, Corvia at the far end. Westport is home. Nothing here claims a real flight or a real train.

Direction that holds: Westport to Alden by air, Alden to Bruck on the ground, Bruck to Corvia on the ground, Corvia to Westport by air. You pass each city once. Each ground-hop date is a travel day, so Bruck and Corvia do not also get a full anchor on the date you roll in. The Westport–Alden flight is the long one, so Alden’s landing date has no anchor. The first Alden anchor is the next day.

Backtracking on the same invented map runs Alden straight to Corvia, back to Bruck, then to Corvia again. Corvia is entered twice because Bruck was out of line. Put Bruck between them or drop it. The extra crossing is a day and another fare component or another ticket. Recompute the budget when you delete it, because the transport line was pricing the wrong shape.

Closed loop on the same map: after Corvia you return to Alden, then fly Alden to Westport, and you add a travel day for that return. Open jaw: fly Corvia to Westport and skip the return to Alden. The surface sector through Bruck stays yours.

Overnight variant: Bruck to Corvia is a night train, so that night and the next morning are one travel day and Corvia’s first anchor moves to the following date. If the train is an individual ticket, Your Europe’s through-ticket rights do not apply. You protect the morning by not booking a dawn entrance.

Write the winner in one line before you search a fare. “Open jaw, Alden then Bruck then Corvia, two travel days, no anchor on the Alden landing date.” Then price that line. A reversed line, Corvia then Bruck then Alden, is a new search, not a discount code.

Read the route in the order you will travel

Forward each booked hop to [email protected], or paste the confirmation, and Tineo parses flights, trains, ferries, and transfers so the order you paid for is the order on the timeline. Trips can be shared, and itineraries can sync for offline use on the train, while live gates, an airline mobile boarding pass, and maps you never saved still need a connection. The iPhone, iPad, Mac, Android, and Windows apps, plus the web app, are at tineo.ai/get. Connecting Gmail is optional, and the offline copy does not replace the rail or airline app when you need a live ticket.

Frequently asked questions

Should I visit cities in the order I am most excited about?

Put the immovable date first, such as a wedding or a ticketed event, and then order the other cities so you keep moving in one direction. Excitement does not tell you whether the hop between two cities exists on your dates. A favorite city placed out of line adds a leg you have to pay for and a day you have to spend on it.

Does an overnight train count as a day in the city I wake up in?

Count it as a travel day. You left one city in the evening and you are not useful in the next city until you are off the train and at your lodging, so that morning is a partial day. Book the first anchor after you have had a real start in town.

What is the difference between a closed loop and an open jaw?

A closed loop brings you back to the city where the abroad portion started, then home. An open jaw flies you into one city and home from another, and you cover the gap yourself. Travelport calls a multi-stop return to the origin a circle trip, and the two shapes are different tickets, so pick one before you search.

Why would the same cities in reverse cost a different amount?

Fare systems price a sequence of airports and breaks, and the city you call the destination may not be the turnaround the fare uses. Reversing the order changes the flights, the airports, and whether a stay is a stopover under that fare's rules. Search the order you will travel, and expect no sample fare on this page.

Sources