How much layover time do you need between flights?
Minimum connecting time is the shortest interval an airport standard, together with any airline exception, allows for transferring a passenger and their luggage between two flights. That figure belongs to the airport and the airline. Reservation systems use it when they build a protected connection, and it is separate from a buffer you add for a bag you must reclaim, a terminal change, immigration, or the speed you walk. A protected connection on one ticket and a self-transfer on two tickets are different problems, so a single layover length does not fit every itinerary.
Where the airline’s number stops
IATA’s station standard defines minimum connecting time as the official shortest interval required to transfer a passenger and their luggage from one flight to a connecting flight at a specific location. The clock runs from the scheduled arrival of the first flight to the scheduled departure of the second. A local minimum connecting times group, or the airline operating committee at that airport, calculates the airport standard and submits it to IATA. On top of that standard, carriers file exceptions: bilateral agreements and the online connecting times a carrier sets for its own flights. Ticketing and reservation outlets must observe those rules when an automated system builds a connection.
That sold gap is the carrier’s number. It assumes the transfer the standard was written for, including luggage moving between the flights. It does not measure a passport queue that applies because you are entering the country, a bag-drop deadline on a second airline, or a walker who needs longer than the planned corridor. A same-terminal domestic connection and an international arrival that sends you landside can show similar clocks and still be different trips.
A reservation system is also allowed to sell point-to-point itineraries that were never built as connections. Two flight numbers on one screen can be that kind of sale. When they are, minimum connecting time was not applied for your benefit, and the second carrier did not take on the first flight’s delay. Read what a self-transfer is before you treat the gap as protected. The record locator on each confirmation is one clue: separate locators often mean separate tickets, though one agency email can hide two tickets behind a single trip id.
A buffer is the part you choose
Your buffer covers the work the standard left with you.
- Bags that will not transfer. On separate tickets, plan to claim the bag and check it in again unless the first airline has confirmed it will go through. Even on one ticket, some arrivals require you to collect a bag for customs and drop it again.
- A change of terminal, concourse, or airport. A train between terminals is still inside one airport. A ride across a city to a second airport is a different trip, with its own delay.
- Immigration and security. Entering a country, or leaving the sterile area and returning through security, sits outside a pure airside transfer.
- Mobility. Stairs, a bus to a remote stand, a stroller, or a traveler who cannot rush the corridor all change how much of the scheduled gap is usable. The standard is an airport value, not a medical assessment.
- The second flight’s check-in and bag drop. Those clocks can close while you are still walking. The check-in window is the guide for that cutoff, and it varies by carrier and route.
Add time only for the jobs on this itinerary. A protected connection with bags checked through, in one terminal, can be short and still be the connection the airline sold. The same minutes are a poor plan when you must clear immigration and check in again. There is no universal pad.
Fare rules change how expensive a miss becomes. A restricted brand may limit changes on either ticket. Fare class is the inventory letter under the brand, and basic economy is one restricted brand. Read the rules before you rely on “we will just move the flight.”
An illustrative connection
Treat every name and clock time in this section as made up. They show the method. They are not a recommendation for any airport.
Jordan holds one ticket. The first flight is scheduled to arrive at 10:40 and the onward flight departs at 11:55 from the same terminal. Bags are checked through. The airline sold the connection, so the 75 minutes met that carrier’s minimum connecting time for that airport on that day. Jordan walks unaided and does not expect to pass through immigration. The personal buffer can be small, because the jobs outside the standard are few. A longer gap would be Jordan’s buffer, not proof that 75 minutes broke a rule.
Priya’s screen shows the same 75 minutes, and the situation is different. The first flight arrives from another country. Priya must collect a suitcase, clear immigration, change terminals, and check in with a second airline on a second ticket. Minimum connecting time for either carrier does not do those jobs. Priya’s buffer has to include the second airline’s bag-drop close, which may sit earlier than the departure, especially on an international itinerary. The hours Priya eventually picks are still illustrative. The lesson is the split: one number is the industry connection rule, and the other number is the list of tasks Priya still owns.
A third version, an overnight in the same city or a transfer to a different airport, adds a hotel or a ground ride. Those are extra bookings. How multi-city routing works is the planning guide for ordering the cities. Sketch the geography on the multi-city trip map planner. This page does not rebuild that worksheet.
How to pick the gap before you pay
- Ask whether one seller put both flights on one ticket. A single checkout page is not proof. Look for one fare and for whether the carrier, or the system, is selling a connection rather than two point-to-point flights. Keep each locator labeled.
- Read the shortest connection the airline is willing to sell for that airport. When the booking site refuses a tighter gap, the refusal is a clue about the connection rule. It is not a comment on your walking speed.
- List the jobs between the flights: stay airside or go landside, bags, immigration, terminal or airport change, and mobility. Strike the jobs the airline has confirmed it will do, such as checking a bag through.
- Look up the second flight’s check-in and bag-drop close for that route. Use the carrier’s page. The dated directory at tineo.ai/blog/airline-check-in points at those pages and is not a substitute for them.
- Set your buffer from the remaining jobs. Write the reason next to the number so you can defend it later. “Two hours, because someone online said so” is not a reason.
- Read the fare rules on both flights if a miss would require a change. A protected connection and a restricted fare can exist together: the airline may still have duties when it causes the miss, and the fare may still limit voluntary changes.
When the first flight runs late
On a protected connection, talk to the airline that sold the ticket. The contract of carriage is where that carrier describes delayed flights and missed onward segments. US refund rules depend on the carrier’s responsibility for the flight in question. Read the Department of Transportation refunds page for the current rule. This guide does not restate thresholds or amounts.
On two tickets, the second airline did not sell the connection. Expect to deal with the first airline about the first flight, and with the second ticket’s own fare rules about the flight you are about to miss. Minimum connecting time does not move the second departure. A longer buffer reduces the chance you are the person in that conversation. It does not change which contract applies.
Put both clocks on the itinerary
Forward each confirmation to [email protected], or paste it, and Tineo places the flights on one itinerary so the arrival and the next departure sit together. A shared trip, with notes and polls, can hold the buffer you chose and the reason for it. Apps for iPhone, iPad, Mac, Android, Windows, and the web are at tineo.ai/get. An itinerary can sync for offline use, while a live gate still needs a connection, and the offline copy does not replace the airline.
Frequently asked questions
Is two hours enough time between flights?
Two hours is a gap you either bought or you did not. It is not a standard that fits every airport. Compare the minimum connecting time on a protected connection with the jobs still left for you: bags, a terminal change, immigration, and how fast you can move.
Who sets minimum connecting time?
IATA publishes an airport standard: the official shortest interval for transferring a passenger and their luggage between flights at a specific location, measured on scheduled times. Airlines also file their own connecting-time exceptions. The gap a reservation system will sell is that industry number, and it is separate from a buffer you add.
Does minimum connecting time cover a self-transfer?
Minimum connecting time is what reservation systems use when they build a connection. A self-transfer is two tickets, and building those flights as point-to-point trips is allowed even when they do not meet a connection rule. Bags, immigration, and a new check-in stay with you on a self-transfer.
What happens if you miss a protected connection?
On one ticket, the selling airline's contract of carriage is the document that describes a missed onward flight. US refund rules depend on the carrier's responsibility for the flight in question, and the Department of Transportation's refunds page is the place to read them. A second airline on a separate ticket is a different problem.
Related guides
- What is a self-transfer?
A self-transfer is two tickets. If the first flight is late, the second airline does not owe you a new flight. Bags, immigration, and check-in stay with you.
- What is an airline check-in window?
An airline check-in window is the carrier's online open and close. The airport desk can shut earlier, and both times vary by airline and route.
- How does multi-city flight routing work?
One multi-city ticket is a single contract for several cities, and city order, surface gaps, and separate tickets change the fare and who protects a connection.
Sources
- IATA, Station Standard Minimum Connecting Time (accessed 2026-11-20)
- IATA, SSIM Chapter 8, minimum connecting time standards (accessed 2026-11-20)
- U.S. Department of Transportation, Refunds (accessed 2026-11-20)